EPS 80

polistiren fatada eps 80
Request an offer
Know your required quantity
Thickness (mm)
Surface (m2)
m2 / bax
Packs
  • Technical specifications:

    Bending resistance in conformity with EN 12089 : BS 125 | ≥ 125 kPa
    Compresion effort at a 10% deformation in conformity with EN 826: CS(10)80 | ≥ 80 kPa
    Thermal conductivity : ≤ 0,038 W/mk
    Combustion class: EPS is made from fireproof raw material. Euroclass E for fire reaction (conform SR EN 13501-1+A1/2010)
    Resistance factor for diffusion of water vapours: 20-40
    Thickness : 10-350 mm

  • Fields of use:

    Used for insulating building facades

  • Marking:

    PS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS125- CS(10)80- DS(N)2-DLT(1)5-TR150- WL(T)3– WD(V)1;

  • Sign of recognition:

    1 red stripe on the edge of the panel

    Contact us
    Member of the Expanded Polystyrene Manufacturers Association ROMEPS

    Graphite EPS 80

    Polistiren EPS 80 Grafitat
    • Technical specifications:

      Bending resistance in conformity with EN 12089 : BS 150 | ≥ 150 kPa
      Compresion effort at a 10% deformation in conformity with EN 826: CS(10)80 | ≥ 80 kPa
      Thermal conductivity: ≤ 0,031 W/mk
      Combustion class: EPS is made from fireproof raw material.
      Resistance factor for diffusion of water vapours: 20-40
      Thickness : 10-350 mm

    • Fields of use:

      Used for insulating building facades

    • Marking:

      EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS150- CS(10)80- DS(N)2-DLT(1)5-TR150- WL(T)3– WD(V)1;

    • Sign of recognition:

      grey coloured panels

      EPS 90

      Polistiren fatada eps 90
      • Technical specifications:

        Bending resistance in conformity with EN 12089 : BS 200 | ≥ 200 kPa
        Compresion effort at a 10% deformation in conformity with EN 826: CS(10)90 | ≥ 90 kPa
        Thermal conductivity : ≤ 0,036 W/mk
        Combustion class: EPS is made from fireproof raw material. Euroclass E for fire reaction
        Resistance factor for diffusion of water vapours: 30-70
        Thickness : 10-350 mm

      • Fields of use:

        Used for insulating building facades

      • Marking:

        EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS150- CS(10)90- DS(N)2-DLT(1)5-TR150- WL(T)3– WD(V)1;

      • Sign of recognition:

        yellow coloured panels.

        History

        1972
        Founding

        HIRSCH Porozell GMBH was founded in Landskron, Carinthia, Austria

        1974
        Glanegg Relocation

        The company has relocated to Glanegg.

        1976
        Relocation

        The company relocated to Glanegg and Carinthia

        1985
        International

        International expansion begins

        1989
        New entities

        HIRSCH Dammstoffe GMBH was formed

        1990
        Reconstruction

        The factory was rebuilt after a fire

        1992
        New entities

        Thermozell Entwicklungs-und Vertriebs GMBH was formed

        1996
        Expansion

        The first Hungarian subsidiary, Kurt Hirsch Kft, was established in Sarvar

        1997
        Listing

        HIRSCH Servo AG goes public on the Vienna Stock Exchange.

        1998
        Expansion

        Expansion in the segment of expanded polystyrene block molds is continued with HIRSCH Italia

        2000
        Excellence

        The center of excellence HIRSCH Machinery and Plant Engineering has been built in Glanegg.

        2002
        Production

        Production at the factories in Hungary (Nyíregyháza and Jászfényszaru) has started.

        2003
        Expansion

        The management of the mold making company in Wroclaw, Poland, was taken over

        2004
        Expansion

        The production capacity of Wroclaw has expanded and the block production started in Glanegg, Austria

        2005
        Expansion

        The second mold factory is open in Poland (Lodz)

        2006
        Expansion

        Production starts at the polystyrene factory for insulation in Romania (Cluj), two factories purchased in Slovakia (Podolinec), the second phase of the expansion is completed in Wroclaw and Lodz (Poland)

        2007
        Production

        Production starts at the new insulation factory in Glanegg

        2008
        Marketing

        The Global Green Built marketing company was founded to promote the construction of expanded polystyrene panels

        2009
        Expansion

        The extension of the plant in Slovakia is completed and Global Green Pallets GMBH has been formed

        2010
        Production

        Floor heating boards have entered production in Poland

        2011
        Expansion

        Production begins at the new packaging plant in Oradea

        2012
        2012 Anniversary

        40 years of HIRSCH 1972-2012

        2013
        2013 Anniversary

        10 years of HIRSCH Poland 2003-2013

        2014
        2014 Takeover

        HERZ takes over 85% of the HIRSCH Group’s stake

        2015
        2015 Anniversary

        30 years of HIRSCH Machinery Engineering

        2015
        2015 Anniversary

        Ten years HIRSCH in Romania

        2016
        2016 Acquisition

        The HIRSCH Group purchases 3 polystyrene factories in Romania (Bucharest, Timisoara, Sfantu Gheorghe)

        2017
        2017 Expansion

        The group continues its expansion by acquiring a factory in Ukraine

        2018
        2018 Acquisition

        HIRSCH acquires 6 polystyrene factories in Germany from the French group Saint-Gobain

        2020
        2020 expands

        HIRSCH expands and the newly founded HIRSCH France SAS, acquires six EPS insulation production facilities in France and takes over 49.9% of the French Isossol SAS with two additional plants

        2021
        2021 acquires

        HIRSCH acquires the Czech EPS packaging specialists Morapal S.r.o. and Novopol with 4 production sites, thus closing the gap in our European production network.

        EPS 60

        polistiren expandat interior eps 60
        • Technical specifications:

          Bending resistance in conformity with EN 12089 : BS 100 | ≥ 100 kPa
          Compresion effort at a 10% deformation in conformity with EN 826: CS(10)60 | ≥ 60 kPa
          Thermal conductivity : ≤ 0,040 W/mk
          Combustion class: EPS is made from fireproof raw material. .
          Resistance factor for diffusion of water vapours: 20-40
          Thickness : 10-350 mm

        • Fields of use:

          Used for insulating building interiors

        • Marking:

          EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS100- CS(10)60- DS(N)2-DLT(1)5-TR80- WL(T)3,5– WD(V)1;

        • Sign of recognition:

          1 blue stripe on the edge of the panel

          EPS 100

          polistiren expandat pentru fatada eps 100
          • Technical specifications:

            Bending resistance in conformity with EN 12089 : BS 150 | ≥ 150 kPa
            Compresion effort at a 10% deformation in conformity with EN 826: CS(10)100 | ≥ 100 kPa
            Thermal conductivity: ≤ 0,035 W/mk
            Combustion class: EPS is made from fireproof raw material.
            Resistance factor for diffusion of water vapours: 30-70
            Thickness : 10-350 mm

          • Fields of use:

            Used for insulating floors in residential buildings; roofs and terraces with green spaces;

          • Marking:

            EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS150- CS(10)100- DS(N)2-DLT(1)5-TR150- WL(T)3– WD(V)1;

          • Sign of recognition:

            1 yellow stripe on the edge of the panel

            EPS 70

            • Technical specifications:

              Bending resistance in conformity with EN 12089 : BS 115 | ≥ 115 kPa
              Compresion effort at a 10% deformation in conformity with EN 826: CS(10)70 | ≥ 70 kPa
              Thermal conductivity : ≤ 0,039 W/mk
              Combustion class: EPS is made from fireproof raw material. Euroclass E for fire reaction. (conform SR EN 13501-1+A1/2010)
              Resistance factor for diffusion of water vapours: 20-40
              Thickness : 10-350 mm

            • Fields of use:

              Used for insulating building facades

            • Marking:

              EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)-BS115- CS(10)70- DS(N)2-DLT(1)5-TR100- WL(T)3,5– WD(V)1;

            • Sign of recognition:

              2 blue stripes on the edge of the panel

              EPS 50

              • Technical specifications:

                Bending resistance in conformity with EN 12089 : BS 75 | ≥ 75 kPa
                Compresion effort at a 10% deformation in conformity with EN 826: CS(10)50 | ≥ 50 kPa
                Thermal conductivity : ≤ 0,042 W/mk
                Combustion class: EPS is made from fireproof raw material.
                Resistance factor for diffusion of water vapours: 20-40
                Thickness : 10-350 mm

              • Fields of use:

                Used for insulating building interiors

              • Marking:

                EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS75- CS(10)50- DS(N) 2-DLT(1)5-TR60- WL(T)4– WD(V)1;

              • Sign of recognition:

                1 green stripe on the edge of the panel

                EPS 120

                • Technical specifications:

                  Bending resistance in conformity with EN 12089 : BS 200 | ≥ 200 kPa
                  Compresion effort at a 10% deformation in conformity with EN 826: CS(10)120 | ≥ 120 kPa
                  Thermal conductivity : ≤ 0,035 W/mk
                  Combustion class: EPS is made from fireproof raw material.
                  Resistance factor for diffusion of water vapours: 30-70
                  Thickness : 10-350 mm

                • Fields of use:

                  Used for insulating floors in residential buildings; roofs and terraces with green spaces

                • Marking:

                  EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS200- CS(10)120- DS(N)2-DLT(1)5-TR150- WL(T)2– WD(V)1;

                • Sign of recognition:

                  2 yellow stripes on the edge of the panel

                  EPS 150

                  Polistiren expandat EPS 150
                  • Technical specifications:

                    Bending resistance in conformity with EN 12089 : BS 200 | ≥ 200 kPa
                    Compresion effort at a 10% deformation in conformity with EN 826: CS(10)150 | ≥ 150 kPa
                    Thermal conductivity : ≤ 0,034 W/mk
                    Combustion class: EPS is made from fireproof raw material.
                    Resistance factor for diffusion of water vapours: 30-70
                    Thickness : 10-350 mm

                  • Fields of use:

                    Used for insulating floors in residential and industrial buildings; roofs and terraces with green spaces

                  • Marking:

                    EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS200- CS(10)150- DS(N)2-DLT(1)5-TR200- WL(T)3– WD(V)1;

                  • Sign of recognition:

                    1 black stripe on the edge of the panel

                    EPS 200

                    Polistiren expandat acoperis
                    • Technical specifications:

                      Bending resistance in conformity withEN 12089 : BS 250 | ≥ 250 kPa
                      Compresion effort at a 10% deformation in conformity with EN 826: CS(10)200 | ≥ 200 kPa
                      Thermal conductivity : ≤ 0,033 W/mk
                      Combustion class: EPS is made from fireproof raw material.
                      Resistance factor for diffusion of water vapours: 40-100
                      Thickness : 10-350 mm

                    • Fields of use:

                      Used for insulating floors in residential and industrial buildings; roofs and terraces with green spaces.

                    • Marking:

                      EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS250- CS(10)200- DS(N)2-DLT(1)5-TR250- WL(T)3– WD(V)1;

                    • Sign of recognition:

                      2 black stripes on the edge of the panel

                      Graphite EPS 100

                      Polistiren acoperis grafitat
                      • Technical specifications:

                        Bending resistance in conformity with EN 12089 : BS 150 | ≥ 150 kPa
                        Compresion effort at a 10% deformation in conformity with EN 826: CS(10)100 | ≥ 100 kPa
                        Thermal conductivity : ≤ 0,030 W/mk
                        Combustion class: EPS is made from fireproof raw material.
                        Resistance factor for diffusion of water vapours: 30-70
                        Thickness : 10-350 mm

                      • Fields of use:

                        Used for insulating floors in residential buildings; roofs and terraces with green spaces

                      • Marking:

                        EPS – EN 13163 – T(1)- L(2) – W(1)- Sb(1)- P(3)- BS150- CS(10)100- DS(N)2-DLT(1)5-TR150- WL(T)3– WD(V)1;

                      • Sign of recognition:

                        Graphite grey coloured panels

                        Safety Helmet

                        Eps boxes for food transports

                        EPS boxes for fish transports

                        Foldable and Reusable Arcel Box

                        Reusable EPP box for plasma screens

                        Boxes for the transport of pharmaceutical and biotechnological products

                        Ice Cream Shipping Boxes

                        Heat insulating box for thermosensitive products